Talk:Frequently Asked Questions
From DSL Wiki
Contents |
System requirements
What is the least possible hardware configuration to run DSL on?
Saving static IP address
It would be more complete to use the lines
ifconfig eth0 xxx.xxx.xxx.xxx broadcast yyy.yyy.yyy.yyy netmask zzz.zzz.zzz.zzz
where XXX.XXX.XXX.XXX is the static IP address to be used, for example 192.168.0.1 yyy.yyy.yyy.yyy is the broadcast address to be used, for example 192.168.0.255 and zzz.zzz.zzz.zzz is the netmask to be used, for example 255.255.255.0
route add default gw xxx.xxx.xxx.xxx
where xxx.xxx.xxx.xxx is the IP address of the gateway to be used, for example 192.168.0.10
echo nameserver xxx.xxx.xxx.xxx > /etc/resolv.conf
where xxx.xxx.xxx.xxx is the domain name server to be used, for example, ..........(do you know a good one e.g. googles?)
ifup eth0
starts the network device eth0.
Commands for other devices can follow.
Typos
"How can have VNC start automatically at boot" should be "How can I have VNC start automatically at boot".
Winblows
Might want to change that to Windows to save yourself looking like prejudice idiots. I was interested in trying DSL, but intolerant morons are definitely not my favorite distro-makers. Or if it's just the Wiki-author, give him a beating, and let's be friends ;)
- I don't know, I chuckled when I read it :P -nFriedly
USB
I'd reccomend adding a link to Installing to a USB Flash Drive in the Frequently Asked Questions#How Do I Install to a USB Pendrive? section
Side note: Why is so much stuff locked from editing?! Isn't that the whole point of a wiki: being user editable!? -nFriedly 4 December 2006 23:02 (EST)
Big Changes
As for the static IP changes, I felt it was clearer as is, so I didn't change it. Some additions/clarifications might be a good idea, but I especially didn't like the idea of writing a paragraph after each simple command.
Fixed the VNC typo.
As for Winblows, see How To Use This Wiki, especially the last section, DSL is not Wikipedia.
I deleted the USB content, and replaced it with a link to the full USB page. No sense writing the same thing twice.
I think FAQ was locked because of spam. John is pretty conservative when it comes to letting people touch his stuff. I added Frequently Asked Questions Beta. Now you can make the changes yourself, and I'll bring them over every couple weeks or so.
-Winter Knight, Dec 5 2006
I Suggest You Add Hyperlinks to "How Can I Help Section"
This will improve your chances of people actually helping.
Initial boot problems
Hi!
I tried my "luck" with DSL, but I couldn't boot it. I burned it to become a bootable CDRW, I tried with all the 3 images, but I get a black screen almost right after trying to boot. I tried the failsafe options and also setting to the VGA mode. It got stuck one step further, at the Starting the kernel step. I'm using a Fujitsu Siemens Amilo L7300 laptop. Any ideas? P.S.: I didn't have any (such big) problems running Fedora, SUSE, Ubuntu, etc... Any help will be warmly welcomed to e-mail: darkman@inorbit.com
Hello!
I have the same question!
How can I find the installation instruction.
Waiting for ...
cui.gavin@gmail.com
X Windows version?
What version of X does DSL use that`s tiny enough?
JWM and Fluxbox. -Michael
dsl-embeded download malfunction
When I tried to download dsl by going to link it didn't work. It said the link could not be found or something. Does any one know what to do?If so post it here.
Most likely an old link or a broken mirror. Try another mirror. - Curaga
386 is NOT enough
I have just tried to run DSL on a 386 following Loadlin Install, and the boot comes to a screeching halt with the following words:
No coprocessor found and no math emulation present. Giving up.
Please spare other 386 hopefuls the headaches I've been through by appending the requirement for a 387 math coprocessor on the FAQ page. - NeoAmsterdam 2008-03-01 14:03 EST
