Joined: Sep. 2006
||Posted: June 07 2007,14:24
Thank for this very interesting link.
By default the pc card works at 19200 but I also tried 9600 (I had to change the baud rate during the boot, when the BIOS gives the hand to Grub I guess). It stops at the same place with both baud rates:
|Code Sample |
|Press any key to continue.|
kernel /boot/linux24 root=/dev/hde1 quiet 2 noacpi noapm nodma noscsi frugal ss
h noeject norestore console=ttyS0,9600n8
[Linux-bzImage, setup=0x1400, size=0xf17f7]
[Linux-initrd @ 0x7f29000, 0xc64e1 bytes]
Which makes me think I should modify something in minirt24 (something in initrc?).
The strange thing is that, when my hyperTerminal is configured at 9600, the funny message I get after a while with nothing (probably the duration of the boot with the console not being redirected to the serial port) is now
Does DSL think the serial port is connected to a modem?