| Quote |
| root@box:~# dvdrecord --help > help dvdrecord: Usage: dvdrecord [options] track1...trackn Options: -version print version information and exit dev=target SCSI target to use as CD/DVD-Recorder timeout=# set the default SCSI command timeout to #. debug=#,-d Set to # or increment misc debug level kdebug=#,kd=# do Kernel debugging -verbose,-v increment general verbose level by one -Verbose,-V increment SCSI command transport verbose level by one -silent,-s do not print status of failed SCSI commands driver=name user supplied driver name, use with extreme care driveropts=opt a comma separated list of driver specific options -checkdrive check if a driver for the drive is present -prcap print drive capabilities for MMC compliant drives -inq do an inquiry for the drive and exit -scanbus scan the SCSI bus and exit -reset reset the SCSI bus with the cdrecorder (if possible) -overburn allow to write more than the official size of a medium -ignsize ignore the known size of a medium (may cause problems) -useinfo use *.inf files to overwrite audio options. speed=# set speed of drive blank=type blank a CD-RW disc (see blank=help) fs=# Set fifo size to # (0 to disable, default is 4 MB) -load load the disk and exit (works only with tray loader) -eject eject the disk after doing the work -dummy do everything with laser turned off -msinfo retrieve multi-session info for mkisofs >= 1.10 -toc retrieve and print TOC/PMA data -atip retrieve and print ATIP data -multi generate a TOC that allows multi session In this case default track type is CD-ROM XA2 -fix fixate a corrupt or unfixated disk (generate a TOC) -nofix do not fixate disk after writing tracks -waiti wait until input is available before opening SCSI -force force to continue on some errors to allow blanking bad disks -dao Write disk in DAO mode. This option will be replaced in the future. -raw Write disk in RAW mode. This option will be replaced in the future. -raw96r Write disk in RAW/RAW96R mode. This option will be replaced in the future. -raw96p Write disk in RAW/RAW96P mode. This option will be replaced in the future. -raw16 Write disk in RAW/RAW16 mode. This option will be replaced in the future. tsize=# Length of valid data in next track padsize=# Amount of padding for next track pregap=# Amount of pre-gap sectors before next track defpregap=# Amount of pre-gap sectors for all but track #1 mcn=text Set the media catalog number for this CD to 'text' isrc=text Set the ISRC number for the next track to 'text' index=list Set the index list for the next track to 'list' -text Write CD-Text from information from *.inf files textfile=name Set the file with CD-Text data to 'name' -audio Subsequent tracks are CD-DA audio tracks -data Subsequent tracks are CD-ROM data mode 1 (default) -mode2 Subsequent tracks are CD-ROM data mode 2 -xa1 Subsequent tracks are CD-ROM XA mode 1 -xa2 Subsequent tracks are CD-ROM XA mode 2 -cdi Subsequent tracks are CDI tracks -isosize Use iso9660 file system size for next data track -preemp Audio tracks are mastered with 50/15 µs preemphasis -nopreemp Audio tracks are mastered with no preemphasis (default) -copy Audio tracks have unlimited copy permission -nocopy Audio tracks may only be copied once for personal use (default) -scms Audio tracks willl not not have any copy permission at all -pad Pad data tracks with 15 zeroed sectors Pad audio tracks to a multiple of 2352 bytes -nopad Do not pad data tracks (default) -shorttrack Subsequent tracks may be non Red Book < 4 seconds if in DAO mode -noshorttrack Subsequent tracks must be >= 4 seconds -swab Audio data source is byte-swapped (little-endian/Intel) -gui Make output more GUI- (and less human-) readable -delay x Set delay before writing to x seconds (default: 9) The type of the first track is used for the toc type. Currently only form 1 tracks are supported. |
